Most mobile devices with the Android operating system, whether old or current, include a battery with a certain number of milliamps (mAh), the higher the value, the longer the life of said component, although it may vary depending on your needs. It will also depend on the care given.
As you remember, the useful life of a mobile battery is measured by charge cycles, what does this mean? This is an indicator to know approximately how much time is left to use the above energy source. Users complete a cycle when the sum of their charges equals 100%.
WATCH: Guide to Using Google Translate Without Internet on Your Android Phone
For example: suppose you charge your smartphone from 0% to 80%, then you drain the full battery because you start playing games, browsing social networks and making phone calls , so as not to run out of power, you connect it again but this time to 20%, the sum of both charges reach 100%, that means you have finished the charge cycle. Modern cell phones with 4,000 or 5,000 mAh batteries support between 300 or 500 charge cycles, in simple terms you can charge it from 0% to 100% only about 300 or 500 times. We at Depor will teach you how to count charging cycles so that you can keep track and take better care of your device’s battery.
Learn to count your Android smartphone’s charge cycles
- First, download the “AccuBattery – Battery” application on your Android cell phone, you can find it in the Google Play Store or by clicking on the following link.
- The app will show you a brief introduction to its operation. Skip these steps.
- Now, click on the three stripes icon located at the top right corner. Several options will be displayed, tap on “Settings”.
- Scroll down and turn on the switch labeled “Detailed log” in the “Performance” section.
- Finally, the charging cycle will appear in the “Health” section at the bottom. All you have to do is start using and charging your cell phone so that it automatically counts them.
Know the solution when the touch screen of your Android mobile does not work
- Restart the cell phone: Surely there is a process that is freezing the touch screen of the device, so when you restart your cell phone all processes will also be canceled and the RAM memory will return to 0GB usage. Will go How do you restart your phone if touch doesn’t work? Simple, simultaneously press the physical power button, volume minus and plus for about 5 or 10 seconds, when it restarts, release them because otherwise you’ll be using “root” mode. If you are prompted for a security pattern before shutting down or rebooting, you have no choice but to wait for the battery to drain.
- Access Safe Mode: Like computers or laptops, cell phones and tablets can also be infected by any type of virus. This will cause bugs like frozen screen in your device. We recommend that you use “Safe Mode”, a tool that, after enabling, your smartphone will automatically restart to show you only the pre-installed Android applications, if the touch screen works without problems If so, it’s probably a virus.
- Touch doesn’t work, how do I enter safe mode? It’s a good question, but it has a solution. Restart your cell phone several times with the method we mentioned in the beginning, so that you can force the system to access the above modes.
- Other solutions: clean the touch screen with flannel, dirt prevents the cell phone from recognizing your gestures; Remove or replace the screen protector, sometimes this device breaks or wears out and prevents you from browsing normally; reset the cell phone, it is worth noting that after doing this you will lose all your data, be it photos, videos, documents, etc .; Take it to technical service.
